|
R-Strings & Cables uses all BCY products and carries most colors of the BCYX99, 452x and 8190 bow string material on hand. 8125 in limited colors for Recurves available. Force 10 in limited colors for Crossbows available. Pre-Stretched and served with 300lbs of tension R-Strings & Cables takes orders by phone 507-521-1133 or by email [email protected] All strings are made to order with a one to two day turn around. |
|
Information I Need To Complete Your Order
How to measure your string and servings so your new set of R-Strings & Cables will match your bow perfectly and the things I need to know when you order.
1. Your name, mailing address and phone number
2. Type of bow Make and Model
3. Colors of the string (pick one or two colors)
4. Color of the servings
5. String and Cable lengths. On most bows these measurements can be found on the bottom limb of your bow.
6. If the sticker is gone you can look it up on the bow company web sight or take the strings off the bow and measure from end loop to end loop.
7. Serving placement measurements.
DO NOT UNTWIST THE STRING BEFORE MEASURING.
String : with the string off the bow lay it out so the bottom of the string is on your left, hook it on a nail
>15” > 25-30” 15” <
O----------)------------------(---------)----------------------(----------O
Bottom Center Top
Serving Serving Serving
Some bows will have two buss cables this is a true two cam bow
Some will have two or more control cables like an Elite or OK bow.
Some will have one buss cable and one control cable. This is a cam &1/2 system like the one found on most Hoyt bows.
Recurve strings please measure your end loops too.
Hook the tape measure to the same nail and measure where the serving starts and stops. Should read like this.
0 to 15” 25” to 30” 15” to 0
8. Measuring the control cable or cables. (Note servings may be different on each control cable so please measure both.)
Control cable
> 5” >16”- 25“ 10”<
0-----)------------(------------)--------------------(--------0
bottom serving for top
serving rollers serving
This would read 0-5” 16”-25” 10”-0
Note: If your bow has a cable slide you will not have roller servings.
9. Buss cable serving (Note: buss cable is the one that Ys at one end.)
>11” >15” -27” 9”-7”<
0---------)---------------(----------------)-------------(---)<
bottom serving for rollers top
serving serving
This would read 0-11” 15”-27” 9”-7”
Note: when measuring the top serving include the yolk loops.
How to measure your string and servings so your new set of R-Strings & Cables will match your bow perfectly and the things I need to know when you order.
1. Your name, mailing address and phone number
2. Type of bow Make and Model
3. Colors of the string (pick one or two colors)
4. Color of the servings
5. String and Cable lengths. On most bows these measurements can be found on the bottom limb of your bow.
6. If the sticker is gone you can look it up on the bow company web sight or take the strings off the bow and measure from end loop to end loop.
7. Serving placement measurements.
DO NOT UNTWIST THE STRING BEFORE MEASURING.
String : with the string off the bow lay it out so the bottom of the string is on your left, hook it on a nail
>15” > 25-30” 15” <
O----------)------------------(---------)----------------------(----------O
Bottom Center Top
Serving Serving Serving
Some bows will have two buss cables this is a true two cam bow
Some will have two or more control cables like an Elite or OK bow.
Some will have one buss cable and one control cable. This is a cam &1/2 system like the one found on most Hoyt bows.
Recurve strings please measure your end loops too.
Hook the tape measure to the same nail and measure where the serving starts and stops. Should read like this.
0 to 15” 25” to 30” 15” to 0
8. Measuring the control cable or cables. (Note servings may be different on each control cable so please measure both.)
Control cable
> 5” >16”- 25“ 10”<
0-----)------------(------------)--------------------(--------0
bottom serving for top
serving rollers serving
This would read 0-5” 16”-25” 10”-0
Note: If your bow has a cable slide you will not have roller servings.
9. Buss cable serving (Note: buss cable is the one that Ys at one end.)
>11” >15” -27” 9”-7”<
0---------)---------------(----------------)-------------(---)<
bottom serving for rollers top
serving serving
This would read 0-11” 15”-27” 9”-7”
Note: when measuring the top serving include the yolk loops.
